info@SadraPZH.com

Uncategorized

نمایش 1 - 40 از 90

دستگاه GC برند PerkinElmer مدل Autosystem

Part no: ---- ----
5973 Mass Spectrometer Filament

Part no: ---- ----
Back seals, 2.3 mm hole, PTFE, 12/pk. for use with DAD flow cell, standard, semi micro and bio-inert

Part no: ---- ----
Ball valve, 1/8 inch

Part no: ---- ----
Cap 0.9mm JGF Royal Blue 100/pk

Part no: ---- ----
Cap, screw, blue, PTFE/red silicone septa, 500/pk. Cap size: 9 mm.

Part no: 5820-5185
Capillary SS Tubing, 180mm x 0.17mm ID, Similar to Agilent #G1313-87305

Part no: ---- ----
Capillary SS Tubing, 800mm x 0.17mm ID, Similar to Agilent 01078-87305

Part no: ---- ----
Column nut for GC capillaries, 1/pk

Part no: ---- ----
Column nut for MS interface

Part no: ---- ----
Compact Ferrule, Vespel/Graphite VG2, 60% Vespel/40% Graphite, 1/16″ X 0.8mm ID, 10-pk.

Part no: ---- ----
Detector Adaptor for FID/NPD

Part no: ---- ----
Ferrule, 0.4 mm id, 15% graphite/85%Vespel, 0.1 to 0.25 mm column, 10/pk

Part no: ---- ----
Ferrule, 0.4 mm id, preconditioned for MSD interface, 15% graphite/ 85% Vespel, 0.25 mm column, long, 10/pk

Part no: ---- ----
Ferrule, 0.5 mm id, 15% graphite/85%Vespel, 0.32 mm column, 10/pk

Part no: ---- ----
Ferrule, 0.8 mm id, 15% graphite/85% Vespel, 0.45 to 0.53 mm column, 10/pk

Part no: ---- ----
Ferrule, 40% graphite/60% Vespel, 1/4 inch, 10/pk

Part no: ---- ----
Ferrule, Graphite Compact 1/16″ X 0.8mm ID for Agilent GCs, 10-pk.

Part no: ---- ----
Ferrule, Graphite Reducing, 1/8″ to 1/16″, 10-pk.

Part no: ---- ----
Ferrule, graphite, short, 0.5 mm id, for 0.1 to 0.32 mm columns, 10/pk

Part no: ---- ----
Ferrules, Graphpak 2M inlet, for 0.32 mm columns

Part no: ---- ----
Ferrules, Graphpak 3D, 5/pk

Part no: ---- ----
Ferrules, Vespel/Graphite, Compact, VG2, 60% Vespel/40% Graphite, 1/16″ x 0.4 mm ID for Agilent GCs, 50-pk.

Part no: ---- ----
Ferrules, Vespel/Graphite, Standard, VG1, 85% Vespel/15% Graphite, 1/16″, 0.5 mm ID, 10-pk.

Part no: ---- ----
Ferrules, Vespel/Graphite, VG2, 60% Vespel/40% Graphite, 1/16″ x 0.4 mm ID, 10-pk.

Part no: ---- ----
Ferrules, Vespel/Graphite, VG2, 60% Vespel/40% Graphite, 1/16″ x 0.4 mm ID, 50-pk.

Part no: ---- ----
Ferrules, Vespel/Graphite, VG2, 60% Vespel/40% Graphite, 1/16″ x 0.5 mm ID, 10-pk.

Part no: ---- ----
Fitting, PEEK, for 0.06 inch capillary, 2/pk. Finger tight fitting PEEK for 1/16in capillaries

Part no: ---- ----
Flexible Metal ferrule, UltiMetal Plus, 0.5 mm id, for 0.32 mm fused silica tubing, 10/pk

Part no: ---- ----
Gas Clean hydrocarbon purifier

Part no: ---- ----
GC inlet seal, gold plated, with cross

Part no: ---- ----
GC inlet seal, gold plated, with washer

Part no: ---- ----
Glass filter, solvent inlet, 20 µm, for Agilent 1200 Infinity Series

Part no: ---- ----
Gold Disk Seal for Agilent 1050, 1100, 1200, 1220, 1260, 1290, Replaces Restek# 25467, Similar to Agilent #5067-4728

Part no: ---- ----
Hellma Cells 114-Qs 10mm

Part no: ---- ----
Igniter cable assembly, universally compatible

Part no: ---- ----
Inlet adapter, Graphpak 2M, for 0.25 to 0.33 mm columns

Part no: ---- ----
Inlet liner, Ultra Inert, split, low pressure drop, glass wool

Part no: ---- ----
Inlet liner, Ultra Inert, splitless, single taper, glass wool

Part no: ---- ----
Inlet Seals, 0.8mm Gold Plated For Agilent GCs, 2-pk.

Part no: ---- ----

نمایش 1 - 40 از 90